Skip to main content

Deglitching a Sparkfun 7-segment Serial Display

The display in my Ambient Bus Arrival Monitor is a Sparkfun 7-segment Serial Display connected to the TTL serial port.  I had noticed that occasionally the display would reset itself to 0000 (or sometimes 0, 00 or 000).  It was even possible to make it do this by touching the body of the bus.  It didn't happen often so I was able to ignore it but then it began to happen more and more.

After a very long and tedious investigation I discovered why.  I started out by blaming my code, my soldering, the cable I was using, the quality of the connectors, ...  Only having eliminated everything that I'd touched did I realize it must be something else.

The display has two input methods: serial (which I am using) and SPI (which I am not).  The SPI interface has a clock signal (which in the case of the display is acting as an input) called SCK.  The manual for the display says "The display is configured using SPI mode 0 (CPOL = 0, CPHA = 0), so the clock line should idle low".

If you take a quick look at the schematic for the display you'll discover that the SCK pin on the microcontroller is just connected to a solder pad for connection.


The upshot is that if you (the user) don't connect that pin to something Sparkfun aren't doing it for you.  The display glitch I was seeing was that this floating clock input would sometimes go high and the firmware for the device would then read a byte (all zeroes of course) and write to the display.

There were two possible fixes: hack the firmware so that it ignores SPI completely, or force the SCK pin low all the time.  I opted for the latter (since it was a quick fix) and connected a 10k resistor between that pin and ground.  Glitch gone.



Pity that Sparkfun didn't include a pull-down resistor on SCK (and possibly on RX as well).

Comments

DJ Scrim said…
Excellent! I thought there would be a snowstorms chance in hell of finding any info on this bug, but then I found your post.

I am employing roughly 10 of these into products monthly and have also been battling this issue.

Thanks a mill, I owe you a beer. Preferably an IPA.

Cheers!
DJ Scrim said…
Excellent! I thought there would be a snowstorms chance in hell of finding any info on this bug, but then I found your post.

I am employing roughly 10 of these into products monthly and have also been battling this issue.

Thanks a mill, I owe you a beer. Preferably an IPA.

Cheers!
I'll accept the IPA as payment.

Popular posts from this blog

Your last name contains invalid characters

My last name is "Graham-Cumming". But here's a typical form response when I enter it:


Does the web site have any idea how rude it is to claim that my last name contains invalid characters? Clearly not. What they actually meant is: our web site will not accept that hyphen in your last name. But do they say that? No, of course not. They decide to shove in my face the claim that there's something wrong with my name.

There's nothing wrong with my name, just as there's nothing wrong with someone whose first name is Jean-Marie, or someone whose last name is O'Reilly.

What is wrong is that way this is being handled. If the system can't cope with non-letters and spaces it needs to say that. How about the following error message:

Our system is unable to process last names that contain non-letters, please replace them with spaces.

Don't blame me for having a last name that your system doesn't like, whose fault is that? Saying "Your last name …

Importing an existing SSL key/certificate pair into a Java keystore

I'm writing this blog post in case anyone else has to Google that. In Java 6 keytool has been improved so that it now becomes possible to import an existing key and certificate (say one you generated outside of the Java world) into a keystore.

You need: Java 6 and openssl.

1. Suppose you have a certificate and key in PEM format. The key is named host.key and the certificate host.crt.

2. The first step is to convert them into a single PKCS12 file using the command: openssl pkcs12 -export -in host.crt -inkey host.key > host.p12. You will be asked for various passwords (the password to access the key (if set) and then the password for the PKCS12 file being created).

3. Then import the PKCS12 file into a keystore using the command: keytool -importkeystore -srckeystore host.p12 -destkeystore host.jks -srcstoretype pkcs12. You now have a keystore named host.jks containing the certificate/key you need.

For the sake of completeness here's the output of a full session I performe…

More fun with toys: the Ikea LILLABO Train Set

As further proof of my unsuitability to be a child minder (see previous post) I found myself playing with an Ikea LILLABO 20-piece basic set train.


The train set has 16 pieces of track (12 curves, two straight pieces and a two part bridge) and 4 pieces of train. What I wondered was... how many possible looping train tracks can be made using all 16 pieces?

The answer is... 9. Here's a picture of the 9 different layouts.


The picture was generated using a little program written in Processing. The bridge is red, the straight pieces are green and the curves are blue or magenta depending on whether they are oriented clockwise or anticlockwise. The curved pieces can be oriented in either way.

To generate those layouts I wrote a small program which runs through all the possible layouts and determines which form a loop. The program eliminates duplicate layouts (such as those that are mirror images of each other).

It outputs a list of instructions for building loops. These instructions con…