Skip to main content

Updated list of my GNU Make articles

CM Crossroads has reorganized their site recently. To ensure that all the latest URLs are available for my article here's an updated list.

You could buy a copy of The GNU Make Book which contains all the articles (and more!), or you could use the following list (which I've newly updated):

May 2008: Usman's Law
March 2008: GNU Make user-defined functions, part 2
February 2008: GNU Make user-defined functions, part 1
December 2007: GNU Make path handling
October 2007: GMSL 1.09: A look inside the tweaks and updates
September 2007: Makefile Debugging: An introduction to remake
July 2007: GNU Make escaping: a walk on the wild side
June 2007: Painless non-recursive Make
May 2007: Atomic Rules in GNU Make
April 2007: GNU Make meets file names with spaces in them
February 2007: GNU Make's $(shell)/environment gotcha
December 2006: Makefile Optimization $(eval) and macro caching
November 2006: The pitfalls and benefits of GNU Make parallelization
October 2006: Tips and tricks from the automatic dependency generation masters
September 2006: Sorting and Searching
August 2006: Target-specific and Pattern-specific GNU Make macros
July 2006: Making directories in GNU Make
June 2006: Rebuilding when a file's checksum changes
May 2006: What's new in GNU Make 3.81
April 2006: Tracing rule execution in GNU Make
March 2006: Rebuilding when CPPFLAGS changes
February 2006: Dynamic Breakpoints in the GNU Make Debugger
December 2005: Adding set operations to GNU Make
November 2005: What's New in GMSL 1.0.2
October 2005: An Interactive GNU Make Debugger
August 2005: Makefile Assertions
July 2005: The Trouble with $(wildcard)
June 2005: GNU Make Gotcha ifndef and ?=
March 2005: The GNU Make Standard Library
February 2005: Learning GNU Make Functions with Arithmetic
January 2005: Self-documenting Makefiles
December 2004: Learning Make with the Towers of Hanoi
November 2004: Makefile Optimization $(shell) and := go together
October 2004: Makefile Debugging: Tracing Macro Values
September 2004: Setting a Makefile variable from outside the Makefile
August 2004: The Trouble with Hidden Targets
July 2004: Dumping every Makefile variable
June 2004: Printing the value of a Makefile variable

Please let me know if any of these break.

Comments

Greg Davidson said…
Your latest, at http://www.cmcrossroads.com/article/learning-gnu-make-functions-arithmetic says it's tagged with "gun make" which I guess was supposed to be "gnu make". Oddly, when I click on the tag, I get the response that there are no articles with that tag, so go figure!

Popular posts from this blog

Your last name contains invalid characters

My last name is "Graham-Cumming". But here's a typical form response when I enter it:


Does the web site have any idea how rude it is to claim that my last name contains invalid characters? Clearly not. What they actually meant is: our web site will not accept that hyphen in your last name. But do they say that? No, of course not. They decide to shove in my face the claim that there's something wrong with my name.

There's nothing wrong with my name, just as there's nothing wrong with someone whose first name is Jean-Marie, or someone whose last name is O'Reilly.

What is wrong is that way this is being handled. If the system can't cope with non-letters and spaces it needs to say that. How about the following error message:

Our system is unable to process last names that contain non-letters, please replace them with spaces.

Don't blame me for having a last name that your system doesn't like, whose fault is that? Saying "Your last name …

All the symmetrical watch faces (and code to generate them)

If you ever look at pictures of clocks and watches in advertising they are set to roughly 10:10 which is meant to be the most attractive (smiling!) position for the hands. They are actually set to 10:09.14 if the hands are truly symmetrical. CC BY 2.0image by Shinji
I wanted to know what all the possible symmetrical watch faces are and so I wrote some code using Processing. Here's the output (there's one watch face missing, 00:00 or 12:00, because it's very boring):



The key to writing this is to figure out the relationship between the hour and minute hands when the watch face is symmetrical. In an hour the minute hand moves through 360° and the hour hand moves through 30° (12 hours are shown on the watch face and 360/12 = 30).
The core loop inside the program is this:   for (int h = 0; h <= 12; h++) {
    float m = (360-30*float(h))*2/13;
    int s = round(60*(m-floor(m)));
    int col = h%6;
    int row = floor(h/6);
    draw_clock((r+f)*(2*col+1), (r+f)*(row*2+1), r, h, floor(m…

Importing an existing SSL key/certificate pair into a Java keystore

I'm writing this blog post in case anyone else has to Google that. In Java 6 keytool has been improved so that it now becomes possible to import an existing key and certificate (say one you generated outside of the Java world) into a keystore.

You need: Java 6 and openssl.

1. Suppose you have a certificate and key in PEM format. The key is named host.key and the certificate host.crt.

2. The first step is to convert them into a single PKCS12 file using the command: openssl pkcs12 -export -in host.crt -inkey host.key > host.p12. You will be asked for various passwords (the password to access the key (if set) and then the password for the PKCS12 file being created).

3. Then import the PKCS12 file into a keystore using the command: keytool -importkeystore -srckeystore host.p12 -destkeystore host.jks -srcstoretype pkcs12. You now have a keystore named host.jks containing the certificate/key you need.

For the sake of completeness here's the output of a full session I performe…