Skip to main content

Posts

Showing posts from November, 2021

Making an old USB printer support Apple AirPrint using a Raspberry Pi

There are longer tutorials on how to connect a USB printer to a Raspberry Pi and make it accessible via AirPrint but here's the minimal one that's just a list of commands and simple instructions. 1. Install Raspbian on a SD card 2. Mount SD card on some machine and navigate to / . Add a file called ssh and set up wpa_supplicant.conf for WiFi access. Now you have headless and don't need a keyboard or monitor. 3. Boot. Login. sudo raspi-config . Change password. 4. Connect printer via USB cable 5. Then execute the following sequence of commands to set up CUPS and make it accessible on the network. sudo apt-get update sudo apt-get full-upgrade sudo apt-get install cups sudo usermod -a -G lpadmin pi sudo cupsctl --remote-any sudo systemctl restart cups 6. Visit http://raspberrypi:631/admin and add the local printer. Make sure "sharing" is enabled on the printer. 7. Then make sure AirPrint is set up sudo apt-get install avahi-daemon sudo reboot Printer should work